The Ply-Flier Materials List

LUMBER:

5- 4'x8' Panels, 1/4" ACX Exterior Plywood (or Marine Grade)
-1 Panel for Bottom Front,and Bulkheads #1,2,3,and 4.
-1 Panel for Bottom Rear and Mast Step.
-l Panel for Deck Rear, Dagger Board Sides, and Cockpit Side.
-l Panel for Deck Front, Transom, and Rudder Box Sides.
-1 Panel for Hull Sides and Oarlocks.

Clear Fir :(or Spruce, Mahogany, or other flexible medium hardwood) 1- 14', 1x4" (keel); 1- 15', 1x6" (Stringers); 1- 8', 1x3' (Joiners, Mast Box); 1- 12', 1x4" (Joiners, Dagger Board Box); 1- 3', 1x12" (Dagger Board); 1- 8', 1x10" (Rudder, Misc.); 1- 6;', 1x2" (Misc. 1- 12', 2x2" (Sail Rig Tube Reinforcers, if needed)

HULL HARDWARE:

900- 1", #8, Plated, Flathead Woodscrews
100- 1-1/2", #8, Plated, Flathead Woodscrews
100- 3/4", #8, Plated, Flathead Woodscrews
1- Heavy-duty Galv. Grab Handle
2- 1/4"x2" Bolts (All bolts, galv. with nuts and screws)
4- 6' lengths, 3/8"x1/2" Aluminum ChanneI-Molding
4- 8' lengths, 3/8"x1/2" Aluminum ChanneI-Molding

ROW-RIG:

2- 7-1/2' Oars
2- Oarlocks
2- 3/4"x 1/8"x 6" Galv. Iron Straps
4- 1/4"x 1-1/2" Bolts
2- 3/16"x 2" Bolts
1- 12"x 7/8" Alum. Tube
1- 12"x 3/4" Alum. Tube
1- 3'x 3'x 3/16" Door Skin Panelling
1- 6"x 1-1/2" PVC Pipe
1- 48" Length Alum. J-Bar Molding
12- Alum. Pop-Rivets;

SAIL RIG:

1- 24"x 3/4" Alum. Tube
1- 24"x 7/8" Alum. Tube
2- 12'x 2" or 2-1/4" Alum. Tube
1- 16'x 2" or 2-1/4" Alum. Tube (1/16" or .065" Wall Thickness, 6061-T-6 Temper)
Scrap 3/4" and 5/8" Dowels
2- 3" Sliding Bolt Locks
1- 3/4" Rubber Chair Leg Cap
1- 8" Alum. Turnbuckle
1- 5"x 1/4" Screw-Eye
1- 2"x 5/16" Bolt
1- 2"x 1/4" Bolt
1- 5/16"x 3" U-Bolt
5-5"x3/8" Eyebolts
3- Single Pulleys for 3/8" Line; 1- Double Pulley for 3/8" Line
1- Cleat
1- 18" Shock-Cord
1- 50'x 3/8" or 5/16" Braided Nylon Rope
1-Roll, 2" Fabric-Backed Duct Tape
30' Nylon String
1- 12'x 18' Woven Polyehtylene Rip-Stop Tarpaulin

DOLLY:

1- 3', 1x10"
2- 6" Wheels
2- Galv. Gate Hinge Gudgeons
4- 1/4"x 1-1/2" Bolts
1- 1/2"x 12" Bolt

FINISHING SUPPLIES:

2-gal. Oil Base Gloss Enamel
2-qts Polyester Auto Body Putty
2-tubes Phenoseal or similar sealer